Setting The Antenna Power; Dtv] Menu - LG BDS590 Owner's Manual

Setting the antenna power

If you are using indoor antenna with a signal
amplifier rated at DC 5V, 100mA, the recorder
can supply power through ANTENNA IN jack.
1. Display [Setup] menu.
2. Use U / u to select the [DTV], and press
ENTER ( ).
3. Use U / u to select the [Terrestrial Setting],
and press ENTER ( )
4. Use U / u to select the [Antenna 5V On] and
press ENTER ( ) to supply antenna power.
NOTE
The [Terrestrial Setting] option must be set to
[Antenna 5V Off ] when your indoor antenna is
supplied the power from the mains. If you set the
[Terrestrial Setting] option to [Antenna 5V On] for
the indoor antenna which is supplied power from
the mains, it may cause serious defect to this unit.

[DTV] Menu

Satellite Setting
Once you have completed setting the digital
receiver to your individual preferences, you
can proceed, if necessary, to adjust the unit
settings to your antenna. Refer to page 15-16
for more information.
Terrestrial Setting
[Auto Tuning]
This option scans a programme and sets
the available programmes. Refer to page
32-33 for more information.
BD582SC-P.BDEULLK_MFL65225402_ENG.indd 35
[Manual Tuning]
Scans digital TV or radio programmes
and adds the found programmes to the
programme list. Refer to page 33 for more
information.
[Antenna 5V Off/On]
If you are using an indoor antenna, use
one with a signal amplifier rated at DC 5V,
100mA and set this option to [Antenna 5V
On]. Refer to page 35 for more information.
Channel Edit
This option allows you to edit the TV or Radio
programmes. Refer to page 33 for more
information.
CI Information
You can enjoy not only scramble services using
the Conditional Access Module (CAM), but also
Free-To-Air services. Different CAM supports
different encryption system. Contact your
service provider or distributor to obtain the
right kind of CAM. Only Free-To-Air services are
available without CAM. This option displays a
menu of CI card funtions. Consult your service
provider for more information on the functions
available. You must obtain a "CI or CI+ CAM"
from your service provider.
Software Auto Update
If you set this option to [On], the unit updates
a newer software automatically through the
built-in digital tuner If the software update is
available from the broadcaster.
Installation 35
3
10. 9. 17. 7:39