Software Update
You can update the software by connecting
the unit directly to the software update server
(see page 82-83).
Software Update (DTV)
You can also update to the latest software
through the built in digital tuner.
NOTE
•
DTV antenna must be connected to the
ANTENNA IN jack on the rear panel.
•
Stop recording before using update function.
1. Press HOME.
2. Use U / u / I / i to select [Setup] in the Home
menu, and press ENTER
3. Use U / u to select [OTHERS] option from the
[Setup] menu, and press ENTER
4. Use U / u to select [Software Update (DTV)],
and press ENTER
( )
sub-options.
5. Use U / u to select [Operation mode], and
press ENTER
.
( )
6. Use I / i to select [Yes], and press ENTER
to search for a new update.
( )
The recorder will check for the newest
update.
If there is no update available, the Message,
"No software" appears.
7. Press ENTER
to select [Yes], and press
( )
ENTER
to start software update.
( )
8. When the update is completed, the
message, "Update is complete. " will appear,
and the power will turn off automatically
after 5 seconds.
9. Turn the power back on. The system now
operates with the new version.
.
( )
.
( )
to display the
Disclaimer Notice
Press ENTER
to view the notice of Network
( )
Service Disclaimer on page 88.
Installation
1
3