Control Box And Connecting Position Of Wiring - LG MULTI V S ARUV060GSD0 Installation Manual

Control box and connecting position of wiring

- Remove all of the screws at side panel and remove the
panel by pulling it forward.
- Connect communication cables between outdoor unit and
indoor units through the terminal block.
- When the central control system is connected to the out-
door unit, a dedicated PCB must be connected between
them.
- When connecting communication cable between outdoor
unit and indoor units with shielded cable, connect the
shield ground to the earth screw.
WARNING
!
The temperature sensor for outdoor air should not be exposed to direct sunlight.
- Provide an appropriate cover to intercept direct sunlight.
Bracket
3/4HP
PI 485
6HP
PI 485
ELECTRICAL WIRING
5HP
2.5HP
※Pictures may differ depending on the model.
49
Side panel
L 1 2 3 4
O N K S D O 4 H
PI 485
PI 485