Table of Contents
Advertisement
Available languages
Available languages
NOTE:
Avoid pinching fingers between the back of the mounting plate
and the wall.
5.
Tighten all bolts.
NOTE:
Pull the plate away from the wall to help tighten the bolts.
PREPARE OVERHEAD CABINET
1.
Read the instructions on the Top Cabinet template, and then tape the template
underneath the overhead cabinet.
2.
Drill the holes following the instructions on the template.
•
Drill holes for the top support screws.
•
Drill a hole large enough for the power cord to fit through.
•
Drill a cutout large enough for the exhaust adapter.
CHECK THE BLOWER PLATE
1.
Place the microwave in an upright position.
2.
Make sure the blower plate is installed correctly on the microwave oven.
MOUNT THE MICROWAVE OVEN
Use two or more people to move and install microwave oven.
Failure to do so can result in back or other injury.
a
WARNING
Excessive Weight Hazard
23
Exhaust Plate
A
Advertisement
Chapters
Table of Contents
