Table of Contents
Advertisement
Upload/Download Failure
A problem occurred when ADT attempted to change or read the system's programming over the telephone line. Call
ADT Customer Care at 800.445.0872 for assistance.
Zone Trouble Indication
What it means: A trouble indication on a zone condition would arise if, for example, the smoke detector is dirty or in
need of adjustment. It could also occur if a sensor has a defective part or a broken wire.
Component Failure Indication
One of the system's devices is not operating properly. Call ADT Customer Care at 800.445.0872 for assistance.
Call ADT Indication
If you receive this trouble message, call ADT Customer Care at 800.445.0872 for assistance.
Siren Failure Indication
The system's siren is not operating properly. Call ADT Customer Care at 800.445.0872.
1. To silence the keypad's beeping, press the CANCEL key.
2. Wait 30 minutes for the system to reset.
3. If the detector has not reset after 30 minutes, the trouble message
returns and the keypad beeps. Call ADT Customer Care at 800.445.0872
for assistance.
36
Advertisement
Table of Contents
