Transferring Files Using Intelli-Studio - Samsung ES90 User Manual

Transferring files to your Windows computer

Transferring files using Intelli-studio

You can download Intelli-studio from the linked webpage and
install it on your computer. When you connect the camera to
a computer with Intelli-studio installed, the program will launch
automatically.
1
In Shooting or Playback mode, press [
2
Select Settings → PC Software → On.
3
Turn off the camera.
4
Connect your camera to your computer with the USB
cable.
You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
The battery will be charged while the camera is connected to a
computer with the USB cable.
5
Turn on the camera.
• When the Intelli-studio installation pop-up appears on the
computer screen, follow the on-screen instructions to
complete the installation.
• Once the Intelli-studio is installed on your computer, the
computer recognizes the camera and launches the Intelli-
].
studio automatically.
6
Select a folder on your computer to save new files to.
• New files stored on the camera will automatically transfer to
the selected folder.
• If your camera has no new files, the pop-up window for saving
new files will not appear.
7
Select Yes.
• New files are transferred to the computer.
For Windows Vista and Windows 7, select Run iLinker.exe from the Auto
Play window to start Intelli-studio. If Run iLinker.exe does not appear on the
computer, click
screen instructions to complete the Intelli-studio installation.
70
Playback/Editing
If you set the USB option to Select Mode, select Computer in the
pop-up window.
→ Computer → Intelli-studio, and then follow the on-