Sign in today to find solutions:

Don't have an account? Sign up

 

Summary of Contents

  • Page 2

    Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung takes no responsibility for any loss or damage that may result from camera malfunction.

  • Page 3

    fi re, injury, electric shock or severe damage to you or your camera. internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre. Please do not use this product in close proximity to fl ammable or explosive gases, as this could increase the risk of explosion.

  • Page 4

    Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or damaged battery could result in fi re or injury. - Use battery with the correct specifi cation for the camera. - Do not short circuit, heat or dispose of battery in fi...

  • Page 5: Table Of Contents

    Contents How to use the Movie clip mode Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording) Things to Watch Out for When Taking Pictures Using the camera buttons to set the camera POWER button SHUTTER button ZOOM button Info (DISP) / Up button...

  • Page 6: Table Of Contents

    Contents Display Bright Quick view Display SAVE Settings Formatting a memory Initialisation Setting up the Date / Time / Date type Time Zone File name Imprinting the recording date Auto power off Selecting Video out type Auto Focus lamp Setting the USB Starting play mode PLAY Playing back a still image...

  • Page 7: Table Of Contents

    Before contacting a service centre Specifi cations SOFTWARE Software Notes System Requirements About the software Setting up the application software Starting PC mode Removing the removable disk Samsung Master Setting up the USB Driver for MAC Using the USB Driver for MAC...

  • Page 8

    Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ from exact appearance.

  • Page 9

    Identifi cation of features Front & Top Shutter button Microphone Flash Lens/ Lens cover Power button Self-timer lamp / AF sensor Speaker...

  • Page 10

    Identifi cation of features Back LCD monitor Camera status lamp MENU button 5 function button Play mode button Strap eyelet USB / AV connection terminal Zoom Tele(T) button (Digital zoom) Zoom Wide(W) button (Thumbnail) Fn / Delete button...

  • Page 11

    Identifi cation of features Bottom Memory card slot Battery chamber cover Tripod socket To open the battery chamber cover, slide it in the direction shown above. 5 Function button Battery holder Battery chamber Information / Up button Flash / Left button Macro / Down button OK / Play &...

  • Page 12

    Identifi cation of features Self-timer lamp Icon Status Description - For the fi rst 8 seconds, the lamp blinks at 1 second intervals. Blinking - For the fi nal 2 seconds, the lamp blinks quickly at 0.25-second intervals. For the 2 seconds, the lamp blinks quickly at Blinking 0.25-second intervals.

  • Page 13: Recover At Normal Temperature

    Movie Approx. 120 MIN 640x480 image size 30fps frame rate These fi gures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods. Important information about battery usage. When camera is not in use, turn off the power.

  • Page 14

    Connecting to a Power Source Important information about USB cable usage. Use a USB cable with the correct specifi cation. If the camera is connected to the PC through a USB hub : connect the camera directly to the PC. If the camera and other devices are connected to the PC at the same time : remove other device.

  • Page 15: The Lcd Monitor

    Connecting to a Power Source Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -). - When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it.

  • Page 16

    Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact.

  • Page 17

    Instructions on how to use the memory card The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). Card pins Write protect switch Label [SD (Secure Digital) memory card] The SD/SDHC memory card has a write protect switch that prevents image fi...

  • Page 18

    When using the camera for the fi rst time Charge the rechargeable battery fully before using the camera for the fi rst time. When the camera is turned on for the fi rst time, a menu will be displayed in the LCD monitor to set date, time and language. This menu will not be displayed again after setting up the date, time and language.

  • Page 19

    LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. [Image & Full Status] Description Recording mode Optical / Digital Zoom bar / Digital Zoom rate Voice Memo Number of available shots remaining Remaining time Internal memory icon Face Retouch / Image Adjust 15 Camera shake Warning Icons...

  • Page 20

    How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. 2. Use the up or down buttons to navigate through the menus. Auto Mode Program Functions Sound Photo Help Guide Scene Display Movie...

  • Page 21

    Starting the recording mode Selecting modes You can select the desired working mode us- ing the MENU button located on the back of the camera. How to use the MENU button 1. Press the MENU button and a menu will be displayed. 2.

  • Page 22

    Starting the recording mode How to use the Program mode ( Selecting the automatic mode will confi gure the camera with optimal settings. You can still manually confi gure all functions except the aperture value and shutter speed. 1. Select the Program mode by pressing the MENU button (p.20).

  • Page 23

    Starting the recording mode Using the Photo Help guide mode ( Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur. This also enables the user to practice the best way to take the pictures. Photo Help Guide Photo Help Guide Features to use when the image is out of focus...

  • Page 24: How To Use The Scene Modes

    Starting the recording mode How to use the Scene modes ( Use the menu to easily confi gure optimal settings for a variety of shooting situations. 1. Select the Scene mode by pressing the MENU button (p.20). 2. Point the camera towards the subject and compose the image by using the LCD monitor.

  • Page 25: How To Use The Movie Clip Mode, Recording The Movie Clip Without Sound

    Starting the recording mode How to use the Movie clip mode ( A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the Movie clip mode by pressing the MENU button. (The Movie clip mode icon and available recording time will display on the LCD monitor.).

  • Page 26: Things To Watch Out For When Taking, Pictures

    Things to Watch Out for When Taking Pictures Pressing the shutter button down half way. Lightly press the shutter button to confi rm focus and fl ash battery charge. Press the shutter button all way down to take the picture. [Press the shutter button] [Lightly press the shutter button] The available memory capacity may vary depending on shooting...

  • Page 27: Using The Camera Buttons To Set The Camera, Power Button, Shutter Button, Zoom Button

    Using the camera buttons to set the camera The recording mode function can be set up by using the camera buttons. POWER button Used for turning the camera’s power on / off. If there is no operation during the specifi ed time, the camera's power will be turned off automatically to save battery life.

  • Page 28

    ZOOM button WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.

  • Page 29: Info (disp) / Up Button

    Info (DISP) / Up button While the menu is showing, the Up button operates as a direction button. In the recording modes or playback mode, pressing this button will display the image information. Show the description of each function. [Filming screen] Macro ( While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu.

  • Page 30

    Macro ( ) / Down button Types of focus mode and focus range (W : Wide, T : Tele) Mode Auto ( Focus Type Auto macro ( W : 10 ~ Infi nity Focus range T : 50 ~ Infi nity Mode Program ( Focus Type...

  • Page 31: Menu Button

    Focus lock To focus on a subject not positioned in the centre of the picture, use the focus lock function. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject.

  • Page 32

    Flash ( ) / Left button If you press the shutter button after selecting the fl ash, the fi rst fl ash fi res to check the shooting condition (Flash range and Power ratio of fl ash). Do not move the camera until the second fl...

  • Page 33

    Flash ( ) / Left button Available fl ash mode, by recording mode Mode SCENE Mode Self-timer ( When the menu is displayed on the LCD monitor, pressing the Right ( o : Selectable) button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( when the photographer would also like to be in the image.

  • Page 34

    Self-timer ( ) / Right button Selecting the self-timer 1. Select a Recording mode with the exception of Voice recording mode. (p.20) 2. Press the SELF-TIMER / RIGHT ( button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor.

  • Page 35: Ok Button, Functions

    MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode.

  • Page 36: How To Enable Functions Using The, Menu Button, Exposure Compensation, White Balance

    Functions ( How to Enable Functions Using the MENU Button 1. Press the MENU button in an available mode. 2. Press the Up / Down button to select the [Functions] menu and press the Right/OK button. Mode White Balance Functions Sound Face Detection Right/OK...

  • Page 37

    Functions ( White balance The white balance control allows you to adjust the colours to appear more natural. Mode Icon The camera automatically selects the ap- Auto WB propriate white balance settings, depending on the prevailing lighting conditions. Daylight For taking images outside. For taking images under a cloudy and Cloudy overcast sky.

  • Page 38

    Functions ( You can select the ISO sensitivity when taking pictures.The speed or specifi c light-sensitivity of a camera is rated by ISO numbers. [Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness. [ISO 80, 100, 200, 400, 800, 1600 ] : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitiv-...

  • Page 39

    Functions ( This function can detect up to 10 persons. When the camera recognises many people at the same time, it will focus on the nearest person. The Digital zoom is not activated in this mode. When the camera detects a target face, the white colour focus frame will be displayed over the target face and the grey colour focus frame appears over the remaining faces.

  • Page 40: Face Tone

    Functions ( Face Tone This menu allows you to control the skin tone in images in beauty shot mode. The higher the level you select, the brighter the skin tone. 1. Select [Face Tone] by pressing the Up/Down button. 2. Select a desired face tone by pressing the Left / Right button and then press the OK button.

  • Page 41

    Functions ( Quality / Frame rate You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode STILL IMAGE mode Icon Sub menu Super Fine Fine Normal File jpeg...

  • Page 42

    Functions ( Drive mode You can select single, continuous, motion capture, and AEB (Auto Exposure Bracketing). [Single] ( : Take one picture only. [Continuous] ( ) : Images will be taken continuously until the shutter button is released. [Motion Capture] ( ) : This takes 5 shots per second, when the shutter is pressed and held down.

  • Page 43

    Functions ( Photo Style Selector You can add various effects to the image without using image editing software. 1. Select the desired Photo style selector by pressing the Left/Right button and press the OK button. 2. Press the Shutter button to take an image. Style mode Icon Normal...

  • Page 44

    Functions ( Image Adjust Contrast You can change the contrast of the image. 1. Select [Contrast] by pressing the Up/Down button. 2. Change the contrast by pressing the Left/Right button. 3. Press the Shutter button to take an image. Sharpness You can adjust the sharpness of the picture you are about to take.

  • Page 45

    Functions ( Voice Memo You can add your voice-over to a stored still image. (Max. 10 sec.) - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture.

  • Page 46

    Functions ( Pausing while recording a voice Using this function, you can record your favourite voice clips into a voice recording fi le without having to create multiple voice recording fi les. 1. Press the OK button to pause recording. 2.

  • Page 47

    Sound menu In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by * are default settings. Menus are subject to change without prior notice. Sound ( Volume You can select a volume of start up...

  • Page 48

    Sound ( AF sound If you set AF sound to on, AF sound will be activated when the Shutter button is pressed down half way so that you can be aware of the camera operation status. - [AF sound] sub menu : [Off], [On]* Self Portrait This occurs when it automatically detects the location of the subject’s face when taking a self-portrait.

  • Page 49: Display Bright, Quick View, Display Save

    Display ( Start up image You can select the image that is fi rst displayed on the LCD monitor whenever the camera is turned on. - Sub menus : [Off]*, [Logo], [User Image] - Use a saved image for the start-up image with the [Start Image] in the [Resize] menu in the play mode.

  • Page 50: Settings

    Settings ( Formatting a memory This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. - Sub menus [Yes] : A window for confi...

  • Page 51: Setting Up The Date / Time / Date Type, Time Zone, File Name

    Settings ( Setting up the Date / Time / Date type You can change the date and time that will be displayed on the captured images and set up the date type. Setting [Time Zone] enables you to display the local date and time on the LCD monitor when travelling overseas.

  • Page 52: Imprinting The Recording Date, Auto Power Off

    Settings ( Imprinting the recording date There is an option to include DATE / TIME on still images. - Sub menus [Off]* : The DATE & TIME will not be imprinted on the image fi le. [Date] : Only the DATE will be imprinted on the image fi...

  • Page 53: Selecting Video Out Type

    Settings ( Selecting Video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.

  • Page 54: Auto Focus Lamp, Setting The Usb

    Settings ( Auto Focus lamp You can turn on and off the Auto Focus lamp. - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On]* : The AF lamp will light up in low light conditions.

  • Page 55: Playing Back A Still Image, Playing Back A Movie Clip

    Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card.

  • Page 56: Movie Clip Capture Function, Playing Back A Recorded Voice, Playing Back A Voice Memo

    Starting play mode Movie clip capture function You can capture still images from the movie clip. How to capture the movie clip 1. Press the OK button while playing the movie clip. Then press the Down button. 2. The paused movie clip is saved in a new file name.

  • Page 57: Lcd Monitor Indicator, Using The Camera Buttons To Set The Camera

    LCD monitor Indicator The LCD monitor displays shooting information about the displayed image. Description Playback mode Voice Memo DPOF Protect Folder name & File name Memory card indicator Battery Aperture value Shutter speed Flash Image size 3648x2736 ~ 320x240 Recording date Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions.

  • Page 58

    Thumbnail ( ) / Enlargement ( Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image.

  • Page 59

    Info (DISP) / Up button When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor. Info (DISP) button Info (DISP) button Play &...

  • Page 60

    Left / Right / Down / MENU button LEFT / RIGHT / DOWN / MENU buttons activate the following. - LEFT button : While the menu is showing, the LEFT button operates as a direction button. While the menu is not showing, press the LEFT button to select the previous image.

  • Page 61

    Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows.

  • Page 62

    Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu Tab Main Menu Sub Menu One Photo Images All Photos...

  • Page 63

    Edit ( Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the play mode button and press the MENU button. 2. Click the Up/Down button from the Edit menu to select [Resize] ( menu tab and press the OK button.

  • Page 64

    Edit ( Rotating an image You can rotate the stored images by various degrees. 1. Press the play mode button and press the MENU button. 2. Click the Up/Down button from the Edit menu to select [Rotate] ( ) menu tab and press the OK button.

  • Page 65

    Edit ( Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image. - OK button : Select / setup the Custom Colour - Up / Down button : Selects R, G, B - Left / Right button : Change the values Image Adjust 1.

  • Page 66

    Edit ( Contrast control You can change the contrast of the image. 1. Select ( ) by pressing the Left/Right button and press the OK button. Then a bar for selecting the contrast will be displayed. 2. Change the contrast by pressing the Left/Right button.

  • Page 67

    Starting the Multi Slide Show ( Selecting Images You can select image to view 1. Use the Up / Down buttons to select the [Images] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. [All] : All images saved in the Memory are played back.

  • Page 68

    Starting the Multi Slide Show ( Setting play interval Set the Multi Slide Show play interval. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval.

  • Page 69

    File Options ( Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card.

  • Page 70

    File Options ( DPOF DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back.

  • Page 71

    File Options ( Index Images (except for movie clips and voice file) are printed as index type. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Select the [Index] menu and press the Right button again.

  • Page 72

    File Options ( Copy To Card This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy To Card] menu tab by pressing the Up / Down button. And then press the Right button.

  • Page 73

    PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. Setting up the camera for connection to the printer 1.

  • Page 74

    PictBridge : Picture Selection You can select images you want to print. Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu will display. 2. Use the Up / Down buttons to select the [Images] menu and press the Right button.

  • Page 75: Pictbridge : Reset, Important Notes

    PictBridge : Reset Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button.

  • Page 76

    - Take a picture for testing the camera condition and prepare extra battery. - Samsung cannot be held responsible for camera malfunctions. If the digital camera is not used for a long period, the date and time may adopt the default settings by automatical battery discharged.

  • Page 77: Warning Indicator

    Warning indicator There are several warnings that may appear on the LCD display. [Card Error] Memory card error Turn off the camera power and turn it on again Insert the memory card again Insert and format the memory card (p.49) [Card Locked] The memory card is locked SD/SDHC memory card : Slide the write protect switch to the...

  • Page 78: Before Contacting A Service Centre

    Before contacting a service centre Please check the following The camera doesn’t switch on There is low battery capacity Insert fresh batteries. (p.14) Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -). The camera power ceases while in use The battery is exhausted Insert fresh batteries.

  • Page 79

    Before contacting a service centre The flash does not fire Flash off mode has been selected Dis-engage flash off mode The camera mode can't use the flash Refer to the FLASH instruction (p.30) Incorrect date and time is displayed The date and time have been set incorrectly or the camera has adopted the default settings Reset the date and time correctly The camera buttons do not operate...

  • Page 80

    - Effective Pixel : Approx. 10.2 Mega-pixel - Total Pixel : Approx. 10.3 Mega-pixel Lens - Focal Length : SAMSUNG Lens f = 6.3 ~ 18.9mm (35mm film equivalent : 35 ~ 105mm) - F No. : F3.2(W) ~ F5.8(T) - Digital Zoom : ·Still Image mode :1.0X ~ 3.0X...

  • Page 81

    Super Fine About 183 About 200 About 252 About 252 About 334 About 495 About 1238 Fine Normal About 472 About 511 About 613 About 619 About 793 About 1067 About 1876 These figures are measured under Samsung standard conditions and may vary depending on shooting conditions and camera settings. Effect...

  • Page 82

    - Approx. 116g (without batteries and card) Operating Temperature - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Samsung Master, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners. (1050mAh)

  • Page 83: Specifi Cations, System Requirements

    - Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. - Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).

  • Page 84: About The Software

    After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Samsung Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips with this software.

  • Page 85: Setting Up The Application Software

    Click the [Samsung Digital Camera Installer] menu in the Auto run frame. 2. Install DirectX, Samsung Master by selecting a button shown on the monitor. If a recent version of DirectX has been installed on your computer, DirectX may not be installed.

  • Page 86

    Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. If your OS is Windows XP/ Vista, an image viewer program will open.

  • Page 87: Starting Pc Mode

    Setting up the application software PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with Windows explorer. Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM. Install Adobe Reader from the CD provided.

  • Page 88: Removing The Removable Disk

    Starting PC mode Connecting the camera to a PC Disconnecting the camera and PC Refer to page 89 (Removing the removable disk). Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1.

  • Page 89: Samsung Master

    7. An image file is transferred from the camera to your PC. - By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.

  • Page 90

    Removing the removable disk Windows 2000/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on.

  • Page 91

    Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start Programs Samsung Master]. Downloading images 1. Connect the camera to your PC.

  • Page 92

    Image display window : A selected image displays in this window. Preview window : You can preview the changed image. A still image edited with Samsung Master can’t be played back on the camera. Refer to the [Help] menu in Samsung Master for further information.

  • Page 93

    Frame display window : You can insert multi media in this window. Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can’t play back in the Samsung Master. Refer to the [Help] menu in Samsung Master for further information.

  • Page 94: Setting Up The Usb Driver For Mac, Using The Usb Driver For Mac

    Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.3. 3.

  • Page 95

    Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager.

  • Page 96

    If the movie clip can’t be deleted, or the removable disk can’t be extracted or an error message displays during the file transfer. If you install only the Samsung Master, the problems mentioned above occasionally happen. - Close the Samsung Master program by clicking the Samsung Master icon on the Taskbar.

  • Page 97

    This Class [B] digital apparatus complies with Canadian ICES-003. Samsung Eco-mark It is Samsung’s own symbol mark is used to effectively communicate Samsung’s environmental friendly product activities to the consumers. The mark represents Samsung’s continuous effort on development of...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: