LG DLHC1455W Owner's Manual page 15

• For safety reasons, two or more people need to
work together to reverse the door.
NOTE
• The appearance of the screws varies and the
screws must be inserted differently depending
on the position. Make sure that you've selected
the correct screw before tightening.
1
Open the door and remove 2 screws on the
door hinge . Remove the door from the
a
cabinet and place it inside facing up on a
b
non-scratching surface.
WARNING
• Be sure to support the weight of the door before
removing the hinge screws.
2
Remove 8 screws and remove the hinge
assembly from the door.
c
• There are 6 screws on the front and 2
screws on the side.
c
3
Remove the 3 screws from the door latch
assembly which is mounted between the
d
door and the hinge assembly. Remove the
screw in the door latch.
4
Swap the position of the hinge assembly
and the door latch assembly
reassemble. Refer to steps 2 and 3 for the
location and number of screws when
reassembling.
d
5
On the appliance cabint, unscrew 2 screws
and remove the door catch
on the opposite side of the door.
6
Remove the 2 decorative screws from the
appliance cabinet and insert them on the
opposite side.
INSTALLATION 15
d
c
and
d
c
. Reassemble it
e