Kohler 30RCL Operation page 8

Residential/light commercial generator sets
Hide thumbs Also See for 30RCL:
Table of Contents

Advertisement

Connecting the battery and the
battery charger. Hazardous voltage
will cause severe injury or death.
Reconnect
the
battery
positive to positive and negative to
negative, to avoid electrical shock and
damage to the battery charger and
battery(ies).
Have
a
electrician install the battery(ies).
Short
circuits.
voltage/current will cause severe
injury or death. Short circuits can
cause bodily injury and/or equipment
damage.
Do not contact electrical
connections with tools or jewelry while
making
adjustments
or
Remove all jewelry before servicing the
equipment.
Accessing the middle compartment
on the control panel. Hazardous
voltage will cause severe injury or
death. On the controller base box and
automatic voltage regulator, do not
touch the terminals for voltage and
current measurement. Disconnect all
power
sources
and
disable
generator set before servicing.
Electrical backfeed to the utility.
Hazardous backfeed voltage can
cause severe injury or death. Install
a transfer switch in standby power
installations to prevent the connection
of standby and other sources of power.
Electrical
backfeed
into
electrical system can cause severe
injury or death to utility personnel
working on power lines.
Servicing the generator set when it
is operating. Exposed moving parts
will cause severe injury or death.
Keep hands, feet, hair, clothing, and
test leads away from the belts and
pulleys when the generator set is
running. Replace guards, screens, and
covers before operating the generator
set.
8
Safety Precautions and Instructions
Hot Parts
correctly,
qualified
Hot coolant and steam.
Hazardous
Can cause severe injury or death.
Before removing the pressure cap,
stop the generator set and allow it to
cool. Then loosen the pressure cap
to relieve pressure.
repairs.
Hot engine and exhaust system.
Can cause severe injury or death.
the
Do not work on the generator set until
it cools.
Servicing the alternator. Hot parts
can cause severe injury or death.
Avoid touching the alternator field or
exciter armature. When shorted, the
alternator field and exciter armature
become hot enough to cause severe
a
utility
burns.
Servicing the exhaust system. Hot
parts can cause severe injury or
death. Do not touch hot engine parts.
The engine and exhaust system
components become extremely hot
during operation.
Servicing the engine heater.
parts can cause minor personal
injury or property damage. Install the
heater before connecting it to power.
Operating the heater before installation
can cause burns and component
damage.
heater and allow it to cool before
servicing the heater or nearby parts.
WARNING
WARNING
Hot
Disconnect power to the
Notice
NOTICE
Canadian installations only.
standby service connect the output of
the generator set to a suitably rated
transfer switch in accordance with
Canadian Electrical Code, Part 1.
NOTICE
Electrostatic
discharge
Electrostatic
discharge
damages electronic circuit boards.
Prevent
electrostatic
damage by wearing an approved
grounding wrist strap when handling
electronic circuit boards or integrated
circuits. An approved grounding wrist
strap provides a high resistance (about
1 megohm), not a direct short, to
ground.
TP-6905 7/18
For
damage.
(ESD)
discharge

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

24rcl38rclb24rcl-qs8Rdc2

Table of Contents