DIR-615
Configuring Local Area Network
1. Go to the Settings / Network page.
2. If needed, change the IPv4 address of the router's LAN interface and the
mask of the local subnet. To do this, click the IPv4 tab and specify
needed values in the IP address and Mask fields in the Local IP
Address section.
3. If needed, specify your own IPv6 address of the router's LAN interface.
To do this, click the IPv6 tab and select the Static value from the Mode
of local IPv6 address assignment drop-down list in the Local IPv6
Address section. Then specify needed values in the
Prefix
fields.
Quick Installation Guide
IPv6 address and
34