Function Buttons; Sitch Width Adjustment Button; Stitch Length Adjustment Button - JUKI HZL-80HP-C Instruction Manual

Function buttons

Stitch width adjustment
button
When you select a stitch, the
machine will automatically set
the recommended stitch width,
which will be indicated by
numbers on the LCD screen.
The stitch width can be
regulated by pressing the stitch
width adjustment buttons.
Certain stitches have a limited
stitch width.
For a narrower stitch, press the
"–" button (left). For a wider
stitch, press the "+" button (right).
The stitch width can be
adjusted between "0.0-7.0".
Certain stitches have a limited
stitch width.
When the Direct Patterns 1-4
and Patterns 00-04 are
selected, the needle position is
regulated by the stitch width
adjustment buttons. Press the
"–" button (left), will move the
needle to the left and press the
"+" button (right), will move the
needle to the right.
The numbers will be changed
from left position "0.0" to extreme
right position "7.0". The pre-set
center needle position will be
indicated as "3.5".
Stitch length adjustment
button
When you select a stitch the
machine will automatically set
the recommended stitch length
which will be indicated by
numbers on the LCD screen.
The stitch length can be
adjusted by pressing the stitch
length adjustment buttons.
To shorten the stitch length,
press the "–" button (left). For a
longer stitch length, press the
"+" button (right).
The stitch length can be
adjusted between "0.0-4.5".
Certain stitches have a limited
length.
29
I