Carton Inventory; Hardware Inventory - Chamberlain 3130 1/3 HP Owner's Manual

Carton Inventory

Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model purchased.
Model 3240
Multi-Function
Door Control Panel
Motor Unit with Light Lens
Model 3130
Safety Sensor
Bracket (2)
RAIL ASSEMBLY
Coupling Sleeve (1)
Hex Bolt 1/4"-20 x 5/8" (4)
Nut 1/4" - 20 (4)
INSTALLATION HARDWARE
Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Model 3130
Model 3240 (1)
SECURITY✚
3-Button Remote Control
Lighted
Door Control Button
Remote Control
Visor Clip
Rail
Motor Unit with 2 Light Lenses
Model 3240
The Protector System
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
If anything is missing, carefully check the packing
material. Parts may be stuck in the foam. Hardware for
installation is also listed below.
Model 3130 (1)
SECURITY✚
®
1-Button Remote Control
Header Bracket
Trolley
®
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
Insulated Staples (30)
Ring Fastener (3)
Drywall Anchors (2)
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
Rope
Handle
5
2 Conductor Bell Wire
White & White/Red
®
Curved Door
Arm Section
Sprocket Coupling
Door Bracket
Safety Labels
and
Straight Door
Literature
Arm Section