Skil CR541301 Owner's Manual page 17

Extension for Vacuum Cleaner
(Fig.8)
Your tool is equipped with an extension (Ф1-1/4''
/ 31.8mm) for connection to vacuum cleaner.
Choose a suitable vacuum-cleaner hose or use
an adapter, if necessary.
WARNING
with the lower guard or cutting operation.
To Attach/Detach Battery Pack
(Fig.9)
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves of the tool, and then slide the battery
pack onto the tool.
NOTICE: Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
To detach the battery pack:
Depress the battery-release button, located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
NOTICE: When placing the battery pack on the tool, be sure that the raised rib on the battery
pack aligns with the groove inside the tool and that the latches snap into place properly.
Improper attachment of the battery pack can cause damage to internal components.
WARNING
Never allow a vacuum-
cleaner hose interfere
Battery tools are always in operating condition. Therefore, remove the
battery when the tool is not in use or when carrying it at your side.
Fig. 8
Extension
Fig. 9
Attach
Ф1-1/4'' (31.8mm)
Battery- Release
Button
Detach
17