Skil CR541301 Owner's Manual page 22

WARNING
hold the auxiliary handle.
g. Proceed cutting in forward direction to end of cut.
WARNING
WARNING
h. Turn saw around and finish the cut in the normal manner, sawing forward.
i. If corners of your plunge cut are not completely cut through, use a jigsaw or hand saw to
finish the corners.
22
When the foot plate rests flat on the surface being cut, release the
lower guard and move the hand holding the front of the foot plate to
Allow blade to come to a complete stop before lifting the saw from
cut.
Never pull the saw backward since blade will climb out of the material
and KICKBACK will occur.