Table of Contents
Advertisement
3-5-4. Option
MENU
Language
Menu Option
Sound
Filter Check Time
Auto Power On
Sleep Timer
Melody
Security
Using
Using this function, you can select the language used for the menu screen.
•
<Position> : You can move Menu Position up/down/left/right.
•
<Transparency> : You can set the translucency of the menu.
•
<High>-<Medium>-<Low>-<Opaque>
•
<Display Time> : You can set the display time of the menu.
•
<5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-<Stay On>
The projector comes with an internal 7W (mono) speaker. Use the settings below to adjust the sound.
•
<100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
Sets the check period for the filter. (Unit: hours)
•
<Off>-<100>-<200>-<400>-<800>
If the filter usage time is larger than the filter check period, the filter check message is
displayed for 1 minute whenever the projector is turned on.
Filter check message: "<Check the filter, and if necessary, clean or replace it.>".
With Auto Power On, if power is supplied to the projector, it turns on automatically without your press-
ing the Power button.
•
<Off>-<On>
With Sleep Timer on, if there is no input signal for the specified time, the projector turns off automati-
cally.
(There must be no button input from the remote control or the top of the projector for the specified
time)
•
<Off>-<10 min>-<20 min>-<30 min>
Set so that a melody plays when the Projector is turned on or off.
•
<Off> - <Low> - <Medium> - <High>
To
deter theft, you can set a password that users must enter when the projector powers on. When
you set a password, the projector will not work without it.
•
<Power On Protection>
•
<Off> : Enter your current password and set the protection function to off.
•
<On> : Enter a new password and set the protection function to on.
•
<Change Password> : Change your current password.
Use the displayed number keys to enter or change the password.
DESCRIPTION
3-5
Hide quick links:
Advertisement
Table of Contents
