8. INSTALLER CHECKLIST
Your installer must have completed and checked
the following:
The dishwasher is square and level.
•
The dishwasher is fastened securely to the
•
cabinetry.
The dishwasher door opens and closes
•
freely. The dishwasher door must close
without hitting any cabinetry or counter
top.
The inlet water supply is turned on and
•
checked for leaks.
The drain hose has been connected and
•
checked for leaks. There must be no kinks
or obstructions in the drain hose.
The drain hose must be installed with a 28"
•
(710mm) high drain loop for drain hook-ups
without any air removed.
If the dishwasher drain is hooked up to a
•
garbage disposal, the drain hopper plug
must be removed.
The spray arms are free and rotate freely.
•
The rinse cycle has been run.
•
The water level will be below the filter
•
screen after the end of the wash program.
It is normal to find some water in the drain
filter area.
9. SELF HELP HINTS:
The screen does not come on:
Check to make sure the breaker to the
•
dishwasher is in the on position.
Check to make sure that the Supply cord is
•
plugged.
No Water is coming into the dishwasher:
Check to make sure the hot water shut-off
•
is in the ON position.
Water does not drain:
Make sure drain hose is not kinked or
•
comes out of air gap next to the sink.
Remove drain hose from disposal making
•
sure plug is removed.
NOTICE :
If your dishwasher is not operating
•
properly after following these steps:
Contact your dealer to schedule an
authorized service agent to inspect your
new dishwasher for any function related
failure.
The manufacturer warranty does not
•
cover installation, conversion or customer
education service visits.
You will find the model and serial number
information on the label located on the right-
hand side of the inner door of your dishwasher,
as shown above.
NOTICE :
Please make a copy of your invoice and keep it
with this manual and register your dishwasher
on-line.
23
USA