Table of Contents
Advertisement
7.3 ADJUSTING THE MOVABLE TOE KICK
Now that you have successfully installed the dishwasher, you need to attach
the toe kick to the dishwasher. The two piece toe kick can be adjusted to the
A
height and depth needed for your kitchen. Be sure to use the slotted toe kick
in the front and the other behind it. They slide into each other.
1. Insert the movable toe kick brackets into the channel (
2. Make sure that the plastic tab to the left of the "L" opening on the
dishwasher has not closed the channel you will push the bracket through.
B
Be sure to notice there is a left and a right bracket.
Adjust the toe kick brackets forward or backwards so that they will align with
the kitchen toe kick (
C
NOTICE :
B
).
14
USA
7.2 READJUSTING FOOT
LEVELS
Now that the dishwasher is in the
cabinet you must readjust the feet to
bring the dishwasher up to the required
height and attach it underneath the
countertop.
1. Readjust the front foot levels with
adjusting wrench to balance the
dishwasher and raise it up under the
countertop, make sure the unit is level.
2. Readjust the rear foot levels with a
screwdriver to balance the dishwasher
and raise it to the required height using
the brackets supplied.
3. Attach the dishwasher underneath
the countertop with the four screws
supplied (Ø 1/8" x 1/8" - Ø 3.5mm x
14mm). Make sure you do not go through
the top of the countertop or damage
granite.
A
).
Advertisement
Table of Contents
