Install plastic to ground and mounted
3
(
with 3 set of bolts (not supplied) firmly.
)
NOTE: Must use the toilet installation
(
gasket ring (not supplied) to seal the
)
area where the waste pipe contacts
Fig.#9
the construction section to avoid
9
leakage.
Carefully align and lower the bowl.
Apply weight to the bowl rim to let the
outlet insert into plastic trap.
Outlet
Plastic Trap
Fig.#10
10
Carefully thread the screws into the
brackets, until toilet is secure.
Alternately tighten left and right sides
to prevent pulling the toilet off center.
Install cap to cover screw.
Do not overtighten.
Bushing
Screw
Fig.#11
Cap
11
Apply caulk around base.
Fig.#12
12
1361130-T01-A
-5-