Natural Gas Conversion - Nexgrill 730-0830MG Operating Instruction

WARNING! FAILURE TO HEED THESE WARNINGS COULD RESULT IN A FIRE OR EXPLOSION THAT COULD
CAUSE SERIOUS BODILY INJURY, DEATH OR PROPERTY DAMAGE.
Natural Gas Conversion must be performed by a QUALIFIED GAS TECHNICIAN ONLY. The QUALIFIED GAS
TECHNICIAN should ensure compliance of local codes, including but not limited to, requirements and installation of grill
regulator. DO NOT ATTEMPT TO CONVERT YOURSELF. Improper conversion could result in a gas leak which could
cause a fire or explosion and cause serious bodily injury, death or property damage. Leaks due to improper conversion could
occur immediately or slowly over time. If you hear any unusual noises or leaks, smell gas or unusual odors, or notice
anything unusual with the operation of your gas appliance after the installation, immediately shut off the gas supply and
discontinue use until the appliance is repaired by a QUALIFIED GAS TECHNICIAN.
Orifice Chart
The different burner valves in this grill have different BTU ratings. This means that the amount of gas coming from each orifice
varies in order to create the BTU's. The holes in the orifices themselves are drilled to different sizes so as to allow the proper
amount of gas to flow through them. Please note the chart below as an easy reference for the various orifice opening sizes for
the different valves in the grill.
Components
Main Burner
Below parts are needed for natural gas conversion:
INCLUDED
Natural gas orifices
NOT INCLUDED
Quick Connector
3.05 m / 10 ft Natural Gas Hose
4" Water Column Regulator with Hose
Tools
6 mm Nut Driver

6 mm Wrench

Hex Key

House
Supply Line
720-0830MG, 730-0830MG orifice sizes
Liquid Propane (LP)
Orifice Size
1.07 mm
3.05 m / 10'
NG Hose
Quick Connector

Natural Gas Conversion

BTU/HR
13,500
Tools that will be needed for conversion:
4" WC
Regulator
with Hose
11
Natural Gas (NG)
Orifice Size BTU/HR
1.75 mm 13,500
6mm
Gas Grill
Connection