Issues
A "Mode Not Supported"
message appears.
There is a plastic smell from the
TV.
The TV
Signal Information
unavailable in the Self Diagnosis
menu.
The TV is tilted to the side.
There are difficulties assembling
◀
the stand base.
The channel menu is greyed
out. (unavailable)
Solutions and Explanations
•
Check the supported resolution of the TV, and adjust the external
device's output resolution accordingly.
•
This smell is normal and will dissipate over time.
•
This function is only available with digital channels from an Antenna / RF/
is
Coax connection.
•
Remove the base stand from the TV and reassemble it.
•
Make sure the TV is placed on a flat surface. It is necessary to use
magnetized screw driver if you cannot remove the screws from the TV
•
The
Channel
English
menu is only available when the TV source is selected.
▶