Table of Contents
Advertisement
3. Select the layout
3.
Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list.
4. Specify the side to be stapled
4.
The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To
change the setting, select another stapling side from the list.
5.
5. Set the margin width
If necessary, click Specify Margin... and set the margin width, and then click OK.
6. Complete the setup
6.
Click OK on the Page Setup tab.
When you perform print, the document is first printed on one side of a sheet of paper. After one side is
printed, reload the paper correctly according to the message.
Press the OK button on the printer to print the opposite side.
Important
• Automatic duplex printing can be performed only when one of the following paper sizes is selected from
Page Size on the Page Setup tab.
Letter 8.5"x11" 22x28cm, A4
• After printing the front page, there is an ink drying wait time before starting to print the back page
(Operation stops temporarily). Do not touch the paper during this time. You can change the ink drying
wait time at Custom Settings in the Canon IJ Printer Assistant Tool.
234
Hide quick links:
Advertisement
Table of Contents
