28
Option
Speaker Select
TV / Ext. / AV / Component / PC
TV Speaker
External Speaker
Video No Signal
Sound Reset
Selecting the Sound Mode
When you set to Dual l ll, the current sound mode is displayed on the screen.
Type of broadcast
Regular broadcast
(Standard audio)
Regular + NICAM
NICAM
Stereo
NICAM-Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or DUAL-I/II
Stereo
■
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
■
This function is only activated in stereo sound signal. It is deactivated in mono sound
signal.
■
This function is only available in
Sound
■
External Speaker
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
•
The –
=+, MMUTE buttons do not operate when the
Speaker Select is set to External Speaker.
•
If you select
External Speaker in the Speaker Select
menu, the sound settings will be limited.
TV's Internal Speakers
/ HDMI
Speaker Output
Mute
Mute
■
Reset All
/ Reset Sound Mode / Cancel
You can restore the Sound settings to the factory defaults.
NICAM
Mono
NICAM
Stereo
NICAM
Dual-1
Dual I
Stereo
Stereo
TV mode.
Description
/ TV Speaker
Audio Out (Optical, L / R Out) to
Sound System
TV / Ext. / AV / Component / PC /
HDMI
Sound Output
Sound Output
Mute
On-screen indication
Mono (Normal use)
Mono
(Normal)
zMono
(Normal)
NICAM
Dual-2
(Normal)
Mono (Normal use)
Dual II
Mono
(Forced mono)
Auto Volume
Speaker Select
Sound Reset
Mono
■
You can select these options
simply by pressing the DUAL
button on the remote control.
: Off
: TV Speaker
►