Sound Menu; Setup Menu; Sound Reset; Srs Trusurround Hd - Samsung PL51E450A1F User Manual

Sound Menu

Mode t
■ Standard: Selects the normal sound mode.
■
■ Music: Emphasizes music over voices.
■
■ Movie: Provides the best sound for movies.
■
■ Clear Voice: Emphasizes voices over other sounds.
■
■ Amplify: Increase the intensity of high-frequency sounds to allow a better ■
listening experience for the hearing impaired.
Equalizer
(standard sound mode only)
■ Balance L/R: Adjusts the balance between the right and left speaker.
■
■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the
■
level of specific bandwidth frequencies.
■ Reset: Resets the equalizer to its default settings.
■

SRS TruSurround HD

(standard sound mode only)
SRS TruSurround HD is a patented SRS technology that solves the
problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television
speakers. It is fully compatible with all multichannel formats.

Preferred Language

(digital channels only)
Digital-TV broadcasts are capable of simultaneous transmission of many
audio tracks (for example, simultaneous translations of the program into
foreign languages).
✎
You can only select a language from among the ones being broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
■ Mono: Choose for channels that are broadcasting in mono or if you are
■
having difficulty receiving a stereo signal.
■ Stereo: Choose for channels that are broadcasting in stereo.
■
■ SAP: Choose to listen to the Separate Audio Program, which is usually a
■
foreign-language translation.
✎
Depending on the program being broadcast, you can listen to Mono,
Stereo or SAP.

Auto Volume

Because each broadcasting station has its own signal conditions, the
volume may fluctuate each time channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by raising the sound
output when the modulation signal is low.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital
audio signal when you connect the digital audio jack on the back of the TV
to a digital audio in jack on a receiver or home theater.
■ Audio Format: You can select the Digital Audio output (SPDIF) format. The
■
available Digital Audio output (SPDIF) format may differ depending on the
input source.
✎
By connecting the TV to a receiver or home theater with Dolby Digital
and 5.1ch speakers and selecting Dolby Digital, you can maximize
your interactive 3D sound experience.
■ Audio Delay: Lets you correct timing mismatches between the audio track
■
and the video when you are watching the TV and listening to digital audio
output from the TV through an external device such as an AV receiver. When
you select Audio Delay, a slider appears. Use the left and right arrow buttons
to adjust the slider. Press ENTERE when done (0ms ~ 250ms).
Speaker Select
■ Speaker Select (External Speaker / TV Speaker)
■
If you are listening to the sound track of a broadcast or movie through
an external receiver, you may hear a sound echo caused by the
difference in decoding speed between the TV's speakers and the
speakers attached to your audio receiver. If this occurs, set the TV to
External Speaker.
✎
When you set Speaker Select to External Speaker, the TV's
speakers are turned off. You will hear sound through the external
speakers only. When you set Speaker Select to TV Speaker both the
TV's speakers and the external speakers are on. You will hear sound
through both.
✎
When Speaker Select is set to External Speaker, the
MUTE buttons will not operate and the sound settings will be limited.
✎
If there is no video signal, both the TV's speakers and the external
speakers will be mute.

Sound Reset

■ Reset All: Resets all sound settings to the factory defaults.
■

Setup Menu

❑ Setting the Time

Time
✎
The current time will appear every time you press the
■ Clock: Setting the clock is for using various timer features of the TV. ■
✎
If you disconnect the power cord, you have to set the clock again.
Clock Mode: Set the current time manually or automatically.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
✎
Available only when Clock Mode is set to Manual.
Time Zone: Select your time zone.
DST (Daylight Saving Time): Switches the DST (Daylight Saving Time)
function on or off.
✎
DST and Time Zone function is only available when the Clock Mode
is set to Auto.
■ Sleep Timer t
■
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
✎
To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the clock
first.
■ On Time / Off Time: Set the hour, minute, am/pm and Activate / Inactivate.
■
(To activate the timer with the setting you have chosen, set to Activate.)
■ Volume: Set the desired volume level. ■
■ Contents: When the On Time is activated, you can turn on a specific channel
■
or play back contents such as photo or audio files.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
- Antenna: Displays the current antenna source.
- Channel: Select the desired channel.
- Music/Photo: Select the folder containing MP3/JPEG files on the
USB device.
✎
The maximum displayed number of files, including sub folders, in one
folder of USB storage device is 2000.
✎
The media may not be playing smoothly when using the device lower
than USB 2.0.
■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual
■
to set at you convenience. If you select Manual, you can set up the day you
want to activate the timer.
- 7 -
VOLUME and
INFO button.