Table of Contents
Advertisement
ENGLISH
14
2
Remove the "INTENZA+" water fi lter from its packaging, immerse it ver-
tically (with the opening positioned upwards) in cold water and gently
press the sides so as to let the air bubbles out.
3
Set the fi lter according to the water hardness of the area where you
live. These settings are specifi ed on the fi lter package.
A = Soft water
B = Hard water (standard)
C = Very hard water
4
Put the fi lter into the empty water tank. Press it until it cannot move
further down.
5
Fill the water tank with fresh water and reinsert it into the machine.
Write down the date of the next water fi lter replacement (+ 2 months).
6
Dispense the entire water tank by using the hot water function (see
chapter "Hot water dispensing").
7
Fill the water tank again.
Advertisement
Table of Contents
