How to assemble the Stand-Base
고
주의
6
Using the 4 screws for securing the stand base and the monitor, firmly attach the monitor to the
stand base. (The exterior of the set may be different than the picture.)
■
고
주의
■
In case of installing your TV on the wall, close the cover 1 on the stand-base connection part
using two screws for hiding.
Viewing the Control Panel
■
The product colour and shape may vary depending on the model.
■
Touch each button to operate.
SPEAKERS
Firmly secure the stand to the TV before moving it, as the stand may fall and
could cause serious injury.
Two or more people should carry the TV. Never lay the TV on the floor
because of possible damage to the screen. Always store the TV upright.
Lights up when the
power is on.
Press to turn the TV
on and off.
Toggles between all the available input sources In the
on-screen menu, use this button as you would use the
ENTERE button on the remote control.
Press to see an on-screen menu of your
TV's features.
Press to increase or decrease the volume.
In the on-screen menu, use the +
buttons as you would use the ◄ and ►
buttons on the remote control.
Press to change channels. In the on-
screen menu, use the
as you would use the ▲ and ▼ buttons on
the remote control.
Aim the remote control towards
this spot on the TV.
(depending on the model)
–
CH
buttons