Kenwood KDC-3047M Service Manual page 8

KDC-3047M/MP1046/MP145/MP145CR/MP146/MP2046
/MP245/MP246AM/MP246G/MP246S/MP3046
Description
BASS BOOST OFF
AUX ON1
SystemQ / dB EQ NATURAL (FLAT)
BEEP Beeps when the key is pressed briefl y.
PREOUT REAR
■ Test mode specifi cation in STANDBY source
Key
Common All lights ON.
System μ-com version
display
1
(forward
Information display
rotation)
Mechanism model name
Mechanism version
Design version display
■1
mode ON/OFF
2 Serial No. display
3 Power ON time display
DISC operation times
4
display
5
DISC EJECT times display
■5
Data Flash ROM writing-in
6
times display
ROM correction version
BAND
display
Audio data initialization
Forced Power OFF
information display
■
8
TEST MODE
Description of display
S Y S 0 1
C D K 1
Design version information display
mode (sub-mode) ON/OFF
S N 0 0 0 0
P O N T M 0
P O N T M X
C D T M 0
C D T M X
E J C N T X
D F C N T X
S 0 0 0 1 M
<System μ-com> <Mechanism μ-com>
S – – – – M
<System μ-com> <Mechanism μ-com>
S M
∗ ∗ ∗ ∗
<System μ-com> <Mechanism μ-com>
A U D I O I
P O F F – –
P O F F P N
Default values
All lights ON.
:
System μ-com version display
– 3 . 0 0
Displays mechanism model name and version
Press and hold this key for 1 second to display the design
version information.
∗Refer to "Design version information display mode" for the
details of display and operation procedure.
Serial No. displayed (8 digits)
0 0 0 0
The 00~50 is displayed for "xx". When less than 1 hour,
H X X
displayed by increments of 10 minutes.
The 00001-10922 is displayed for "xxxxx". MAX 10922 (hours)
X X X X
The 00~50 is displayed for "xx". When less than 1 hour,
H X X
displayed by increments of 10 minutes.
The 00001-10922 is displayed for "XXXXX". MAX 10922
X X X X
(hours)
Disc Eject times display. MAX 65535 (times)
X X X X
While disc EJECT times is displayed, press and hold for 2
seconds or longer to clear disc EJECT times.
The number of data writing-in the Data Flash ROM is
X X X X
displayed. MAX 10000 (times)
0 0 0 1
The number is the ROM correction version number.
– – – –
When not written in yet.
When data not matched
∗ ∗ ∗ ∗
∗Due to the difference in versions.
Audio setting value is re-set to the Test mode default value.
N I T
No forced Power OFF
–
Forced power OFF by communication error between system
L
μ-com and panel.
While the forced power OFF data is displayed, press and hold
for 2 seconds to clear the data.
Description