Carton Inventory
Your garage door opener is packaged in two cartons
which contain the motor unit and the parts illustrated
below. Note that accessories will depend on the
Multi-Function
Door Control Panel
Header Bracket
Curved Door
Arm Section
Belt
Pulley Bracket
Rail Grease
Hardware Inventory
INSTALLATION HARDWARE
Hex Screw #8x3/8" (3)
Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Remote Control
Transmitter Visor Clip
Motor Unit with Light Lens
One-Piece
T-rail
Door Bracket
Trolley
Safety Sensor
Bracket (2)
5
model purchased. If anything is missing, carefully
check the packing material. Parts may be stuck in the
foam. KEEP THE FOAM INTACT (see page 6.)
SECURITY✚
3-Button Remote Control
2-Conductor Bell Wire
White & White/Red
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
Safety Labels
and
Literature
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Insulated Staples (30)
Ring Fastener (3)
Handle
Drywall Anchors (2)
Rope
Carriage Bolts 1/4"-20x1/2" (2)
Wing Nut 1/4"x20 (2)
Belt Cap Retainer
Styrofoam
Belt
Straight Door
Arm Section