Table of Contents
Advertisement
Feature Operations
Note
•
The soft key to reject an incoming call is not
displayed on the handset if the CS is connected
to a KX-NS1000 PBX.
30
Operating Instructions
During a Conversation
Holding a Call
You can put a call on hold by holding the call at your
extension.
To hold the current call
Press
, and then press
Note
•
If Automatic Call Hold is enabled on your
handset, the call will also be put on hold if you
select a DN key other than the one for the
current call. For details, consult your
administrator or dealer.
To retrieve a call on hold at your extension
1.
Press
.
2.
Press the dial key corresponding to the slowly
flashing green DN key, or press [ ] or [ ] to select
a slowly flashing green DN key, and then press
.
Transferring a Call (Call
Transfer)
You can transfer a call to another destination (extension
or outside party).
To transfer
1.
Press
during a conversation.
2.
Dial the party you want to transfer to, and then press
.
3.
Wait until the other party answers to announce the
transfer.
4.
Press
.
Note
•
To return to the call before the transfer
destination answers, press
•
If unscreened transfers are supported on your
phone system, step 3 can be omitted. For
details, consult your administrator or dealer.
To do a blind transfer
1.
Press
during a conversation.
.
.
*1
Document Version 2012-11
Advertisement
Table of Contents
