Watching The Pip/Pop/Twin Picture; Selecting An Input Signal Source For Pip/Twin Picture; Swapping Pip/Twin Picture; Tv Program Selection For Pip/Twin Picture - Zenith R45W47 Installation And Operating Manual

PIP (Picture-In-Picture) / POP
PIP (Picture-In-Picture) / POP
- PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other
source will show a smaller inset image.
- Twin Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each
source is given half the screen.
W atching PIP/POP/T
W atching PIP/POP/T
Press the PIP button to access the sub picture. Each press of PIP changes the PIP options as shown below.
PIP Mode
Selecting an Input Signal Source for PIP/T
Selecting an Input Signal Source for PIP/T
Use the pip input button to select the input source for the sub picture. Each press of pip input button changes
the PIP source. You can also select sources for the
Main Picture Source
DTV Signal
Analog Signal
Swapping the PIP /T
Swapping the PIP /T
Use the swap button to switch the main and sub pictures.
Main Picture Sub Picture
TV Program Selection for PIP/T
TV Program Selection for PIP/T
Select the Analog or DTV option on the Sub input menu or with the pip input button in PIP or Twin picture.
Use the pipch+ pipch- button to select a channel for the sub picture.
/
win Picture
win Picture
POP Mode
Available Sub Picture Sources
Analog, Video 1, Video 2, Front Video, and Video 4
DTV, Analog, Video 1, Video 2, Front Video, and Video 4
win Picture
win Picture
win Picture
win Picture
/ T
/ T
D
F
TV 2-0
E
TV 4-0
TV 6-0
PIP Off
win Picture
win Picture
in the menu.
Main Picture
win Picture
win Picture
Twin Picture Mode
Sub Picture
Owner's Manual 27
Operation