Moving The Pip Sub Picture; Adjusting Main And Sub Picture Sizes For Twin Picture; Pop (Picture-Out-Of-Picture: Channel Scan) - Zenith R45W47 Installation And Operating Manual

Operation
PIP (Picture-In-Picture) / POP
PIP (Picture-In-Picture) / POP
Moving the PIP Sub Picture
Moving the PIP Sub Picture
D / E / F / G
In PIP mode, use the
screen.
Adjusting Main and Sub Picture Sizes for
Adjusting Main and Sub Picture Sizes for
D / E / F / G
Use the buttons to change main and sub picture sizes in Twin Picture mode.
i.e)
POP (Picture-out-of-Picture): Channel Scan
POP (Picture-out-of-Picture): Channel Scan
- Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display,
(while the main picture source remains the current channel). The pictures of all the programmed channels
are searched with the 3 POP screen.
- Note: Run EZ Scan channel search before using POP mode.
1. Press the PIP button to activate the POP mode while in PIP mode.
• Channel selection: Use
screen to shift it for viewing on the Main screen.
• POP selection: Use D / E
• Input source selection for PIP: Use pip input button or Sub Input option on the SETUP
menu to select an input source for the sub picture (You can't select DTV for both the main and
sub pictures simultaneously). You can only select the Analog or DTV signal for sub input
source in POP mode.
2. Press the exit button to cancel POP mode.
28 Projection TV
buttons to move the sub picture to a different location on the
T win Picture
T win Picture
F
button to enlarge the selected channel being searched on the POP
button to select one of 3 POP screen pictures in POP mode.
/ T win Picture continued
/ T win Picture continued
D
F
TV 2-0
E
TV 4-0
TV 6-0