EnGenius X-TRA ESR600H Manual page 82

B N S
ASIC ETWORK ETTINGS
N Data Rate Select the N data rate. This is the rate in

which the ESR600H/ESR750H will transmit data packets
to wireless N compatible devices.
Channel Bandwidth

factory default is Auto 20/40MHz. The default setting
provides the best performance by auto selecting channel
bandwidth.
Preamble Type Select the preamble type. Long Pre-

amble provides better LAN compatibility and Short
Preamble provides better wireless performance.
CTS Protection Select the type of CTS protection. Using

CTS Protection can lower the data collisions between
Wireless B and Wireless G devices and lower data
throughput.
Tx Power Select the wireless signal strength level. Valid

values are between 10% and 100%.
Click Apply to save the settings or Cancel to discard
changes.
ESR600H/ESR750H
Select the channel bandwidth. The
6-31
C A S
ONFIGURING DVANCED ETTINGS
U G
SER UIDE