EnGenius X-TRA ESR600H Manual page 129

A N S
DVANCED ETWORK ETTINGS
Enable Port Triggering

to activate port triggering.
Description Enter notes or details about the port trig-

gered configuration.
Popular Applications

a new one.
Trigger Port Enter the application's outbound port num-

ber(s).
Trigger Type Select the protocol to use for port triggering

from the following: TCP, UDP or Both.
Public Port Enter the inbound port(s) for the application

in the following format: 2300-2400 or 47624.
Public Type Select the protocol to use for the inbound

port from the following: TCP, UDP or Both.
Click Add to append a new configuration to the table or
Reset to discard changes.
ESR600H/ESR750H
Click Enable Trigger Port
Select a default application or add
6-78
P T S
ORT RIGGERING ETUP
U G
SER UIDE