Controls And Their Functions; Front Panel & Remote Control - Yamaha RP-U200 Operation Manual

CONTROLS AND THEIR FUNCTIONS

CONTROLS AND THEIR FUNCTIONS
Front panel & Remote control
1
2
3
4
5
6
1
Input selectors & indicators
These four keys, explained below, are used to select
the input source. The indicator of the selected source
lights up.
● PC key
This key selects your computer as the input source.
Pressing this key repeatedly selects the signals
received at the USB, digital (DIGITAL PC COAX IN or
DIGITAL PC OPT IN) or analog (ANALOG PC IN)
input. The DIGITAL PC OPT IN has priority over the
DIGITAL PC COAX IN, so if you connect to both inputs,
the signal received at the DIGITAL PC OPT IN is used.
6
E-
Front panel
PC
AUX1
AUX2
TUNER
VIRTUAL
5.I
CH
D. DSP
DIGITAL USB PCM
PROLOGIC FM AM ST
VOL
DSP P-SET
7 8
Remote control
POWER
8
PC
AUX1
AUX2
TUNER
MEMORY PRESET
9
4
HALL JAZZ
0
GAME MOVIE
/ D TS
TEST
SURROUND
A
A B
B
MUTE
C
● AUX1 key
This key selects the equipment connected to the
ANALOG AUX 1 IN or DIGITAL AUX 1 OPT IN
connector as the input source. Pressing this key
repeatedly selects the digital or analog input.
● AUX2 key
This key selects the equipment connected to the
ANALOG AUX 2 IN connectors as the input source.
● TUNER key
This key selects the built-in FM tuner as the input
source. If the tuner is already selected, this key toggles
the reception mode between FM auto stereo and FM
monaural.
1
MANUAL
D
E
CHURCH
LIVE
ON/OFF
3
C
VOLUME
6