Panasonic CS-XZ20XKEW-H Service Manual page 87

Before setting the network connection

Confirm the wireless router is connected to the network correctly.

Confirm the Wireless LAN of the smartphone is activated.

Confirm your smartphone and this product are connected to the same wireless router.
14.14.2 Connecting Network
Before attempting to connect to the network, ensure the modem or wireless router is working and properly connected
to allow internet access.

Press at the remote control to communicate with the home wireless LAN access point.

Wireless LAN LED
Fast blink
Slow blink
No blink (stays on)

It can establish the connection to the unit even If the unit is turned OFF.
14.14.3 App Installation
For Android user (Android 5.0 and above)
GET IT ON
 Google Play
Open .

Search for Panasonic Comfort Cloud app.

Download and install.
Note

The app user interface may change without notice when there is a version upgrade.

There is no charge to use this app. However, other charges may be incurred for network connection and
operation.
14.14.4 To Disconnect Wireless LAN (Off Wireless LAN LED)

Press and release one time at the Remote Control Wireless LAN button and the LED will turn off. (LED ON ->
LED OFF).
14.14.5 To Delete Wireless LAN Information

If Wireless LAN is off (LED is Off), turn on Wireless LAN first by press and release one time the Wireless LAN
button. (LED OFF -> LED ON).

Push Wireless LAN button for 5 seconds.

In the Remote Control Operation select "5" and push for 3 seconds.

Initilization is finish and Wireless LAN LED will off automatically.
14.14.6 To Check Wireless LAN Signal Strength

Confirm the air conditioner operation is stopped and press the Wireless LAN button for 5 seconds.

Select "4" in the remocon then press set button and operation stops.

After 5 seconds, the signal strength is shown on the indoor unit Wireless LAN LED.
Strong Signal: Blink 3 times with an interval.
Moderate Signal: Blink 2 times with an interval.
Weak Signal: Blink once with an interval.
No Signal: OFF.

It will stop automatically after 10 minutes. To stop immediately, press Wireless LAN button.
from the indoor unit blinks to indicate the connection status to home access point.
The unit is establishing the connection.
The unit is not securing the connection.
The unit has established the connection.
For iOS user (iOS 9 and above)

Open

Search for Panasonic Comfort Cloud app.

Download and install.
Download on the
.
App Store
87