Sony Handycam DCR-TRV828E Operating Instructions Manual page 154

Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed
images on a "Memory Stick" as
a still image
Before operation
Insert a "Memory Stick" is recorded still images
into your camcorder.
(1) Set the POWER switch to MEMORY. Make
sure that the LOCK is set to the left position.
(2) Press MEMORY MIX in the standby mode.
The last recorded or last composed image
appears on the lower part of the screen as a
thumbnail image.
(3) Press MEMORY+/– to select the still image
you want to superimpose.
To see the previous image, press MEMORY –.
To see the next image, press MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the
desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the
moving image.
(6) Turn the SEL/PUSH EXEC dial to adjust the
effect.
M. CHROM – The colour (blue) scheme of
M. LUMI – The colour (bright) scheme of
C. CHROM – The colour (blue) scheme of
The fewer bars there are on the screen, the
stronger the effect.
(7) Press PHOTO deeper. The image displayed
on the screen will be recorded on the
"Memory Stick." Recording is completed
when the bar scroll indicator disappears.
154
the area in the still image
which is to be swapped with a
moving image
the area in the still image
which is to be swapped with a
moving image
the area in the moving image
which is to be swapped with a
still image
Наложение неподвижного изображения
из "Memory Stick" на подвижное
изображение – MEMORY MIX
Запись наложенных
изображений на "Memory Stick"
как неподвижного изображения
Перед эксплуатацией
(1)
(2)
(3)
(4)
y
(5)
(6)
(7)
y