Table of Contents
Advertisement
14 www.aeg.com
Programmes
The information given in the chart above are in compliance with the EU Com-
mission regulation 2015/2010 implementing directive 2009/125/EC.
1) At the end of spin phase.
7. BEFORE FIRST USE
1.
To activate the drain system, put 2 li-
tre of water in the main wash com-
partment of the detergent dispens-
er.
2.
Put a small quantity of detergent in
the main wash compartment of the
8. USING THE APPLIANCE
1.
Open the water tap.
2.
Connect the mains plug to the mains
socket.
3.
Press button
pliance.
4.
Put the laundry in the appliance.
5.
Use the correct quantity of deter-
gent and additives.
6.
Set and start the correct programme
for the type of laundry and soil.
8.2 Filling the detergent and
additives
Load
Energy con-
(Kg)
sumption
(kWh)
to activate the ap-
1
Water con-
Approxi-
sumption (li-
mate pro-
tre)
gramme
duration
(minutes)
detergent dispenser. Set and start a
programme for cotton at the highest
temperature without laundry. This
removes all possible dirt from the
drum and the tub.
8.1 Loading the laundry
1.
Open the appliance door.
2.
Put the laundry in the drum, one
item at a time. Shake the items be-
fore you put them in the appliance.
Make sure not to put too much laun-
dry in the drum.
3.
Close the door.
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
Remaining
moisture
1)
(%)
Advertisement
Table of Contents
