Connecting A Network Cable (Wired Connection) - Yamaha Aventage RX-A2A User Manual

PREPARATIONS > Preparing for connecting to a network

Connecting a network cable (wired connection)

Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight
cable).
When using a router that supports DHCP, you do not need to configure any network settings for the unit.
Internet
Modem
Wireless router
HDMI OUT
1 2 3
(1 MOVIE) (5 STB) (6 GAME)
eARC/ARC
AUDIO 2 AUDIO 3 AUDIO 4 AUDIO 5 PHONO
(3 MUSIC)
COAXIAL GND
NOTE
You need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters
manually.
Related links
"Setting the network parameters manually" (p.272)
(
"Checking the network information of the unit" (p.269)
(
"Connecting an external power amplifier" (p.80)
(
WAN
LAN
Network cable
HDMI
4 5 6 7
(4 NET RADIO) (8 SERVER)
ZONE OUT PRE OUT
ZONE 2 FRONT SUBWOOFER
1
2
Network Attached Storage (NAS)
PC
NETWORK
ANTENNA
( 2 RADIO )
AM FM
75
The unit (rear)
78