Connecting Speakers; Speaker Requirements - Yamaha Aventage RX-A2A User Manual

PREPARATIONS > Connecting speakers

Connecting speakers

Speaker requirements

Speakers and subwoofers to be connected to the unit must meet the following requirements:
Use following speakers.
(
the front speakers: with an impedance of at least 4-ohm
(
other speakers: with an impedance of at least 6-ohm
(
Use a subwoofer with built-in amplifier.
(
[Search tag]#Q01 Speaker systems
NOTE
Prepare the number of speakers according to your speaker system.
(
Be sure to connect the front left and right speakers.
(
When using surround back speakers, be sure to connect the surround back left and right speakers. Using only one surround back
(
speaker was discontinued.
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker
(
impedance to "6 Ω MIN".
When connecting the front speakers with an impedance of 4-ohm, set the unit's speaker impedance to "6 Ω MIN".
(
Related links
"Setting the speaker impedance" (p.201)
(
"Cable requirements" (p.65)
(
64