F3. Dual Mode Functions; F5. (Clp-130) / F4. (Clp-120) - Yamaha Clavinova CLP-120 Owner's Manual

F3. Dual Mode Functions

You can set various parameters for Dual mode
to optimize the settings for the songs you play,
such as adjusting the volume balance between
two voices.
Dual mode function settings are set individu-
ally for each voice combination.
1. Select the voices in Dual mode and engage
Function mode and select
2. Press the [+/YES] button to engage the Dual
mode function's sub-mode, then use the
[TEMPO/FUNCTION# M, L] buttons to select
the desired sub-mode. Press the [–/NO] [+/
YES] button to assign values.
If Dual mode is not engaged,
and you will be unable to select Dual mode functions.
You can switch from Function mode to Dual mode.
Sub-mode
F3.1: Dual Balance
Setting range:
Normal setting: Different for each voice combina-
You can set one voice as the main voice, and another
voice as a softer, mixed voice.
F3.2: Dual Detune
Setting range:
The available setting range is wider in the lower range (± 60
cents for A-1), and narrower in the higher range (± 5 cents for
C7). (100 cents equal one semitone.)
Normal setting: Different for each voice combina-
Detune Voice 1 and Voice 2 for Dual mode to create a
thicker sound.
42 Detailed Settings – [FUNCTION]
CLP-130/120
.
NOTE
will appear instead of
0 – 20 (A setting of "10" produces an
equal balance between the two Dual
mode voices. Settings below "10"
increase the volume of Voice 2 in
relation to Voice 1, and settings
above "10" increase the volume of
Voice 1 in relation to Voice 2.)
tion.
-10 – 0 – 10 (With positive values,
the pitch of Voice 1 is raised and the
pitch of Voice 2 is lowered. With neg-
ative values, the pitch of Voice 1 is
lowered and the pitch of Voice 2 is
raised.)
TIP
tion.
F3.3: Voice 1 Octave Shift
F3.4: Voice 2 Octave Shift
Setting range: –1, 0, 1
Normal setting: Different for each voice combina-
tion.
You can shift the pitch up and down in octave steps for
Voice 1 and Voice 2 independently. Depending on which
voices you combine in Dual mode, the combination may
sound better if one of the voices is shifted up or down an
octave.
F3.5: Voice 1 Effect Depth
F3.6: Voice 2 Effect Depth
Setting range: 0 – 20
Normal setting: Different for each voice combina-
tion.
These functions make it possible to individually set the
depth of the effect for Voices 1 and 2 for Dual mode.
(The effect depth settings cannot be changed unless the
is ON. Function mode must be exited before
[EFFECT]
the [EFFECT] can be turned ON.)
• "Voice 1" and "Voice 2" are explained on page 26.
F3.7: Reset
This function resets all Dual mode functions to their
default values. Press the [+/YES]
ues.
SHORTCUT:
You can jump directly to the Dual mode functions
pressing the [TEMPO/FUNCTION#] button while holding the
two Dual mode voice buttons.
To exit Function mode, you still need to press the [TEMPO/
FUNCTION#] button so that the TEMPO indicator lights up.
button to reset the val-
TIP
by