Table of Contents
Advertisement
The Function Mode
F3
Dual Mode Functions
mode, then use the [<] and [>] buttons to select the desired dual mode function, as listed
below.
functions cannot be selected. If this happens engage the Dual mode and proceed.
F3.1: Dual Balance
quired by using this function. Use the [–/NO] and [+/YES] buttons to adjust the balance as
required. The balance range is from 0 through 20. A setting of "10" produces equal balance
between the two dual-mode voices. Settings below "10" increase the volume of the 2nd voice
in relation to the 1st voice, and settings above "10" increase the volume of the 1st voice in
relation to the 2nd voice ("1st" and "2nd" refer to the left and right voice selectors, respec-
tively). Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting
(different for each voice combination).
F3.2: Dual Detune
thicker sound. Use the [–/NO] and [+/YES] buttons to set the amount of detuning as required.
The detune range is from –10 through 10. A setting of "0" sets both voices to the same pitch.
Settings below "0" increase the pitch of the 2nd voice in relation to the 1st voice, and settings
above "0" increase the pitch of the 1st voice in relation to the 2nd voice ("1st" and "2nd" refer
to the left and right voice selectors, respectively). Press the [–/NO] and [+/YES] buttons
simultaneously to recall the default setting (different for each voice combination).
F3.3: 1st Voice Octave Shift
F3.4: 2nd Voice Octave Shift
better if one of the voices is shifted up or down an octave. Use the [–/NO] and [+/YES]
buttons to set the octave of the 1st or 2nd voice as required ("1st" and "2nd" refer to the left
and right voice selectors, respectively). The available settings are "0" for normal pitch, "–1" to
shift the pitch down one octave, and "1" to shift the pitch up one octave. Press the [–/NO] and
[+/YES] buttons simultaneously to recall the default setting (different for each voice combina-
tion).
22
After selecting "F3. Y ", press the [+/YES] button to engage the dual-mode function sub-
If the Dual mode is not engaged "F3. - " will appear instead of "F3. Y " and the Dual mode
SHORTCUT: You can jump directly to the dual-mode functions (F3) by pressing the
[FUNCTION] button while holding the two dual-mode voice selectors
corresponding to the voices you want to combine in the dual mode.
.....................................................................................................................................
The volume levels of the two voices combined in the dual mode can be adjusted as re-
.......................................................................................................................................
This function makes it possible to detune the 1st and 2nd dual-mode voices to create a
Depending on which voices you combine using the dual mode, the combination may sound
............................................................................................................
..........................................................................................................
Hide quick links:
Advertisement
Table of Contents
