Cisco Linksys WAG310G User Manual page 27

Wireless-g adsl2+ iad gateway
Hide thumbs Also See for Linksys WAG310G:
Table of Contents

Advertisement

Chapter3
the Upstream Rate is typically 25% of the Downstream
Rate.
NOTE:
The Downstream and Upstream Rates are
affected by distance from and configuration of
the DSL central office.
PVC Connection
Encapsulaton
The Encapsulation setting selected on
the Basic Setup screen is displayed.
DSL Modulaton Mode
The DSL Modulation Mode
selected on the Basic Setup screen is displayed.
Multplexng
The Multiplexing setting selected on the
Basic Setup screen is displayed.
Qos
The QoS method selected on the Basic Setup screen
is displayed.
Pcr Rate
The Pcr Rate value entered on the Basic Setup
screen is displayed.
Scr Rate
The Scr Rate value entered on the Basic Setup
screen is displayed.
Autodetect
The Autodetect setting selected on the Basic
Setup screen is displayed.
VPI
The VPI value entered on the Basic Setup screen is
displayed.
VCI
The VCI value entered on the Basic Setup screen is
displayed.
Enable
The number of Permanent Virtual Circuits (PVC)
is displayed.
PVC Status
The status of the PVC is displayed.
Wreless-G ADSL2+ IAD Gateway
Advanced Configuration
2

Advertisement

Table of Contents
loading

Table of Contents