Sound Arranger - Technics SX-KN2400 Operating Instructions Manual

Part II

Sound Arranger

The SOUND ARRANGER feature lets you select other sounds for the AUTO PLAY CHORD parts of
each rhythm.
1.
Select the rhythm whose sound you wish to
change.
• Do not select the MEMORY button.
2.
In the SOUND ARRANGER, press the SET
button to turn it on.
SOUND ARRANGER
SET
• The display looks similar to the following.
Use the L and M buttons to select the part
3.
whose sound you wish to change.
4.
Select the desired sound.
• The DIGITAL EFFECT on/off status can also
be specified (except for DRUMS part).
• For the DRUMS part, select sounds from the
DRUM KITS group.
• The sound and on/off status of the DIGITAL
EFFECT are shown on the display.
• The sounds marked with # cannot be
changed.
5.
Repeat steps 3 and 4 for the other parts as
desired.
6.
When you have finished selecting the sounds,
press the SET button to turn it off.
OFF/ON
Playing back the sounds
1.
In the SOUND ARRANGER, press the
OFF/ON button to turn it on.
SOUND ARRANGER
SET
2.
Start the rhythm (automatic accompaniment).
• When the OFF/ON button is off, the factory-
preset sounds are produced.
• This setting can be set separately for each
rhythm.
• If you wish to modify the settings you speci-
fied, while the OFF/ON button is on, press the
SET button to turn it on.
Playing the rhythm
OFF/ON
59
QQTG0692