Table of Contents
Advertisement
Part VIII
Part Setting
Set the various sound attributes for each part.
Selecting an attribute
1.
On the SOUND MENU display, select PART
SETTING.
2.
Use the PART SELECT
select the part.
<PAGE 1>
SOUND:
∧
Use the SOUND
and
sound.
• The buttons on the control panel may also be
used to select a sound.
VOLUME:
∧
∨
Use the VOL
and
buttons to adjust the vol-
ume (0 to 127).
PAN:
∧
∨
Use the PAN
and
buttons to adjust the ste-
reo balance (L64–CENTER(CTR)–R63).
• At L64, the sound is completely to the left, at
R63 completely to the right. At CENTER, the
sound is at the center. The display indicates
the selected position.
• Even at the same numerical value, the stereo
balance may differ slightly depending on the
sound.
SUSTAIN:
Use the SUSTAIN ON/OFF buttons to enable or
disable the SUSTAIN function.
∧
∨
Use the
and
buttons to adjust the length of
the sustain.
∧
∨
and
buttons to
∨
buttons to select a
3.
Use the buttons below the display to adjust
each attribute (explained in detail following).
• The settings display is comprised of 5 pages.
Use the PAGE buttons to switch pages.
• When you have completed adjustment of an
attribute, use the buttons along the bottom of
the display to select the next attribute you wish
to adjust.
4.
When you have completed adjusting all of the
settings for one part, select another part and
repeat the adjustment procedure as desired.
• The settings and effects of the PAN, EFFECT
etc. may differ depending on the sound.
KEY SHIFT:
∧
∨
Use the KEY
and
amount of key shift (−24 to +24).
• A value of 1 means a shift of one semi-tone.
To raise (or lower) the pitch one octave, set
the value to +12 (or −12).
∨
• The
button is used to lower the pitch, and
∧
the
button to raise the pitch.
TUNING:
∧
∨
Use the TUNE
and
buttons to adjust the fine
tuning (−128 to +127).
∨
• The
button is used to lower the pitch, and
∧
the
button to raise the pitch.
Sound
buttons to specify the
147
QQTG0692
Hide quick links:
Advertisement
Table of Contents
