Pattern Copy - Technics SX-KN2400 Operating Instructions Manual

Part V

Pattern Copy

Use this function to copy a pattern from a rhythm or from SEQUENCER data.
PATTERN COPY
Copy a rhythm to the COMPOSER.
• You can also copy a pattern from the
MEMORY.
1.
On the COMPOSER MENU display, select
PATTERN COPY.
• The display looks similar to the following.
2.
Select the pattern you wish to copy.
• In the FROM box, specify the settings with the
corresponding buttons.
GROUP: Group name
RHYTHM: Rhythm name
PATTERN: Pattern name
• If ALL is selected, all the patterns are cop-
ied.
3.
Select the memory you wish to copy to.
• In the TO box, specify the settings with the
corresponding buttons.
MEMORY: Memory name (A, B or C)
PATTERN: Pattern name
• If ALL is selected, all the patterns are cop-
ied.
4.
Press the OK button.
• When copying has been successfully com-
pleted, "COMPLETED!" appears on the dis-
play.
• If you wish to use the COMPOSER functions
to edit the copied data, press the EDIT button,
and follow the procedure to record a pattern.
Copying individual parts
∧
1.
Use the PAGE and
PAGE 2/2.
• The display looks similar to the following.
2.
On the FROM side, use the buttons to specify
the part to copy from.
• For the DRUM part you can specify the
DRUMS 1 or 2 part; for other parts you can
specify a part other than a DRUMS part.
3.
Specify the destination on the TO side to
which the part will be copied.
4.
Press the OK button.
Composer
∨
buttons to select
115
QQTG0692