Recording To Mds And Cassettes; Using An Optional Car Adaptor; Using Headphones - Panasonic PalmTheater DVD-LA95 Operating Instructions Manual

Recording to MDs and cassettes

∫ Analog recording
You can record to a cassette or MD deck without sound being affected by copy guard if you
use analog connection.
≥Use a stereo connection cable for analog connection. (
∫ Digital recording
You can record the digital signal directly onto an MD.
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
≥There is no copy guard recorded on the disc.
≥The recording equipment can handle a sampling frequency of 48 kHz.
1. Use an optical fiber cable for digital connection. (
2. When recording DVDs, make the following settings.
3. V.S.S.: OFF (
3. PCM Down Conversion: Yes (
3. Dolby Digital/DTS Digital Surround: PCM (

Using an optional car adaptor:

DC IN 9V
Note
≥Read the car adaptor's operating instructions carefully.
≥In the interests of the traffic safety, do not perform operations on the unit or view video
software while driving a vehicle.
≥Do not rest the unit directly on your lap for a long time. It can become hot and cause burns.
Place the unit in a secure position for viewing.
≥You can enjoy sound through your car audio system by connecting a car stereo cassette
adaptor ( page 4) to this unit's headphone jack.

Using headphones

Preparations
Turn down the volume before connection, and then adjust the level.
34
Note
When headphones are connected, no sound will be output from the unit's stereo speakers.
RQT6025
page 17)
page 41)
This unit (Left side)
DC IN 9V
This unit (Right side)
page 31)
page 31)
page 41)
Part number DY-DC95
Optional car adaptor
VIDEO AUDIO 5.1CH OUT
OPT OUT
To the cigarette
lighter socket
Headphones
3.5 mm ( 1 ⁄ q) stereo
8