Changing The Monitor Settings; Changing The Size Of The Picture; Adjusting The Brightness; Adjusting Color Intensity - Panasonic PalmTheater DVD-LA95 Operating Instructions Manual

Changing the monitor settings

Changing the size of
the picture
Press [MONITOR] on the main unit to
change the monitor settings.
The mode is shown on the LCD as follows.
NORMAL>FULL>ZOOM
^- OFF (no picture)(}
∫ The picture mode and size
The picture shown on the LCD depends on
the display mode and the size recorded on
the disc.
≥If you are not using the LCD on this unit,
select "OFF" (no picture) to conserve
power. (The [Í] indicator flashes.).
≥The LCD is turned off if you close the unit.
≥Horizontal lines may appear in the
picture when the mode is switched to
"ZOOM", but this is not an indication of
malfunction.
Mode
Software
Wide-
screen
4:3 Black bands on the
right and left.
4:3,
(Letterbox)
NORMAL
Full screen
Te quiero
Te quiero
Black frame.
Te quiero
Te quiero
RAM

Adjusting the brightness

1. Press [BRIGHT] on the main unit.
2. Move [3, 4] so ">" points to
"BRIGHT".
3. Use [2, 1] to adjust the brightness.
j5: dark()5: light
4. Press [BRIGHT] to clear the display.
Power consumption increases with the level
of brightness.

Adjusting color intensity

1. Press [COLOUR] on the main unit.
2. Use [2, 1] to adjust the color shade.
j5: light()5: dark
3. Press [COLOUR] to clear the display.
Note
These changes are effective only for this
unit's LCD. Make changes to the television's
settings if you have connected one.
FULL
Full screen
Te quiero
Stretched
horizontally.
Te quiero
Stretched
horizontally.
Te quiero
DVD-A DVD-V VCD
ZOOM
Top and bottom cut
off.
Te quiero
Top and bottom cut
off.
Te quiero
Full screen
Te quiero
19
RQT6025