Transfer (Dubbing) From Tape - Panasonic OmniVision PV-DR2714 Operating Instructions Manual

Transfer (Dubbing) from Tape

NUMBER
keys
STOP
One Touch Dubbing (Tape
RAM DVD-R
You can transfer (dubbing) programs recorded on a tape onto
a disc*1 with one stroke of the button. In One-Touch Dubbing,
programs are automatically dubbed onto the disc from the playback
location on the tape. If you want to transfer (dubbing) from the
desired point, see "Manual Dubbing" on next page.
* Only DVD-RAM and non-finalized DVD-R discs can be used for transfer
1
(dubbing) from a tape. (see page 7.)
Note:
• Copy protected VHS tapes cannot be dubbed to a disc.
Preparation
VCR side:
• Insert a cassette containing material to be dubbed.
DVD side:
• When using a cartridge style disc, confirm that it is not rewrite
prohibited.
• Be sure there is enough space on the disc to accommodate the
dubbing.
• Select the recording mode. (XP, SP, LP, or EP).
• Disengage the disc protect setting.
72
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
1
With both VCR and DVD in Stop mode, press
VCR
and hold down for about 3 seconds after the OSD
DVD
below appears.
INPUT
CH
PAUSE
PLAY
2
Tape rewinds to the beginning automatically.
3
Dubbing begins. Information is displayed on the
screen and sub display.
DVD
DVD REC
REC MODE
AUDIO
Dubbing stops automatically when tape playback is finished or at
disc end.
DVD)
To end dubbing
Press STOP.
• When playback (source) side ends and unit enters Stop mode,
or, if dubbing is stopped due to an error, a message will briefly
appear.
Only the following operations are allowed while
transferring (dubbing)
• Stopping transfer (dubbing) by pressing STOP.
• Changing channels.
-
During dubbing, you can select and watch TV stations using NUMBER
keys and Channel
press DVD or VCR. If it is the dubbing picture, CH is not displayed.
• Selecting input mode by pressing INPUT.
• Turning unit ON/OFF by pressing POWER. (Dubbing will
continue even if power is turned off.)
• Changing audio mode by pressing AUDIO.
Notes:
• While One Touch Transfer (Dubbing) is activated, timer recording cannot
be started.
• When the transfer (dubbing) is not started or not executed, the
"DUBBING" indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
PRESS AND HOLD DUBBING
FOR 3 SEC TO START
DUBBING
Sub Display
keys. To switch back to the dubbing picture,
DVD
VCR DVD
EP XP