Troubleshooting; No Power; No Image; Power Is On But No Screen Image - Westinghouse LCM - 19v5 User Manual

Troubleshooting

No Power

• Make sure the DC cord is plugged into the back of the LCD monitor.
• Make sure the AC power cord is securely connected to the AC socket.
• Plug another electrical device (like a radio) to the power outlet to verify that the
outlet is supplying the proper voltage.

No Image

• Make sure the power button is ON.
• Check whether the LCD monitor and computer power cords are plugged in and
check the power supply.

Power is ON but No Screen Image

•  A djust the brightness and contrast levels.
• Make sure the VGA or DVI cable is securely connected to both the computer and
monitor.

"Out Of Range"

• Check the computer image output resolution and frequency and compare the value
with the preset values of the computer's graphics card.

Fuzzy Image

• Adjust the Phase setting on the monitor.

Image Too Bright or Too Dark

• Adjust the brightness and contrast levels using the OSD.
• Make sure that the computer is not displaying an irregular image.
• Check the VGA or DVI connection between the computer and LCD monitor.
• Perform Auto Adjust.

Distorted Image

• Reset the LCD monitor by performing the "Reset" function using the OSD.
• Remove extra accessories (such as a VGA extension cord).
20