Contents Product Safety Instructions …………………..….………….……… 1 Safety Guidelines…………………………………………….………. 2 Cleaning the LCD Monitor …………………………………………... 3 INSTALLATION Package Contents………………………………….………………… 4 Front View of the LCD Monitor…………………..………………….. 4 Side View of the LCD Monitor…………………….…………………. 5 Rear View of the LCD Monitor………..………………………………6 Installation………….………………………………………………….. 7 OSD Functions PICTURE PARAMETERS: PC PARAMETERS:...
• Do not place heavy objects on the LCD monitor, audio/video cables, or power cord. • If the LCD monitor emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact the Westinghouse Service Center. • WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose...
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the Westinghouse Service Center or an experienced radio/TV technician for assistance. FCC Warning To assure continued FCC compliance, the user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores.
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on the LCD screen or case. Some chemical cleaners have been reported to damage the screen and/or case. Westinghouse Digital will not be liable for damage resulting from the use of any ammonia or alcohol-based cleaners.
INSTALLATION Package Contents Your product package includes: • A 27” Westinghouse LCD Monitor • AC Power Cord • User’s Manual • D-SUB (VGA) Cable Note: For information about purchasing a remote control unit for your LCD monitor, please log on to our website at www.westinghousedigital.com.
Side View of the LCD Monitor 1. Menu 2. Volume + / - 3. OSD Selection ▲ / ▼ 4. Input 5. Power Button Turn OSD Menu ON/OFF Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu.
Rear View of the LCD Monitor 1. VGA Audio IN Connect to the Audio out (Green) from a computer or other device with a VGA output. 2. VGA Using the 15-pin VGA cable provided, connect to a computer or other device with a VGA output. 3.
Installation IMPORTANT: Before beginning, 1. Connect audio and video cables to a computer Connect one or all of the following into the back of the LCD monitor: Connect the enclosed analog VGA cable from your computer VGA CONNECTION: VGA OUT port to the LCD monitor VGA IN port. Connect a Digital DVI cable from your computer or DVD DVI DVI CONNECTION: OUT port to the LCD monitor DVI-HDCP port.
Page 10
2. Connect the power cable Connect the power cord to the LCD monitor then to a properly grounded AC outlet. 3. Turn the Power On Press the Power ON button on the right side of the LCD monitor. 4. Select the input source for the LCD monitor using the OSD menu 5.
OSD Function All the OSD function settings are controlled using the control keys on the right side of LCD monitor. To display the OSD main menu, press the MENU key on the right side of front control keys of the LCD monitor. Use the ▲/▼ keys to highlight the desired OSD sub-menu. Main Menu To select a sub-menu, press the INPUT key on the right side of the LCD monitor.
PICTURE PARAMETERS: Function Name Brightness Brightness adjustment Contrast Contrast adjustment Saturation Saturation adjustment Hue adjustment Color Temp Color temperature adjustment (Color 1, Color 2, Color 3) Sharpness adjustment Sharpness (Sharpness cannot be adjusted in PC mode) Aspect Ratio Set Display to “STANDARD” / “FILL” / “ZOOM” Backlight Backlight adjustment Reset...
PC PARAMETERS: NOTE: The PC PARAMETERS menu is only available when the VGA source is selected. Function Name Auto Automatically adjust the horizontal phase of the image Clock Clock adjustment Phase Phase adjustment Position Adjust the horizontal and vertical position of the image Function...
PICTURE-IN-PICTURE: Function Name Display Mode OFF --> PIP --> PBP --> POP Main Source Select main screen sources VGA --> DVI--> YPbPr1 --> YPbPr2 PIP Source Select sub screen sources Please see PIP/PBP/POP specification in Table 1 Swap Swap main screen and sub-screen source PIP Position Sub-screen display horizontal/vertical position adjustment Sub-screen display size adjustment...
GENERAL SETTINGS: Function Name Menu Position OSD horizontal/vertical position adjustment Menu Timeout Set the time to turn off the OSD automatically Language Set the OSD language Transparency Set OSD transparency level DPMS Turn DPMS On or Off Turn the LED ON or OFF System Info Display Input source, type and signal Factory Reset...
Warning: Do not set the graphics card in your computer to exceed these refresh rates; by doing so may result in permanent damage to the LCD monitor. Note A: Product specifications are subject to change without notice. LCM-27w4 27" (26.97" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix WXGA LCD, 1280 x 720 vertical stripe Anti-reflective coating + Anti-glare coating 170°...
• Make sure that headphones are not connected to the Headphone Jack on the LCD monitor. How Can I Find More Help? • Log on to: www.westinghousedigital.com • Contact Westinghouse Customer Service at (866) 287-5555 or write us at service@westinghousedigital.com...