GE GSF25XGWBB Owner's Manual And Installation Instructions page 26

INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
• Do not install the refrigerator where the
temperature will go below 60°F (16°C) because
it will not run often enough to maintain proper
temperatures.
• Do not install the refrigerator where the
temperature will go above 100°F (37°C) because
it will not perform properly.
• Install it on a floor strong enough to support it
fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and plumbing
and electrical connections:
23'/25' CustomStyle
Sides 1/8" (4 mm)
Top 1" (25 mm)
Back 1/2" (13 mm)
DIMENSIONS AND SPECIFICATIONS
3/4" (19 mm)
Airspace
(1/2" [13 mm] Gap +
24" (61 cm)
1/4" [6 mm] Wall
Cabinet
Plates)
Installation Instructions
23' (33" wide),
25', 26', 27', 29'
™
1/8" (4 mm)
1" (25 mm)
1" (25 mm)
Electrical
Water
25" (63.5 cm)
Countertop
DIMENSIONS AND SPECIFICATIONS
(for 23' CustomStyle
70
DIMENSIONS AND SPECIFICATIONS
(for 25' CustomStyle
72
" (183.5 cm) required for full adjustment
*72 1 /
4
of mobility wheels. If cabinets installed above
refrigerator have doors that are flush to the top of
the opening for the refrigerator, then an additional
1/8" may be required to provide clearance for
cabinet doors to open freely.
26
™ models)
" (178.4 cm)
1 ⁄
4
36"
(91.4 cm)
24" (61 cm)
™ models)
" (183.5 cm)*
1 ⁄
4
36"
(91.4 cm)
24" (61 cm)